Embracing Norway's tieback opportunity
Norway's subsea market is entering a period where tiebacks are set to play an increasingly important role in bringing new resources into production.
This reflects a wider change on the Norwegian Continental Shelf (NCS), where continued exploration around established fields is uncovering resources that can make use of infrastructure already in place. At the end of 2025, the Norwegian Offshore Directorate (NOD) identified 91 discoveries awaiting development on the NCS, with the portfolio now consisting mainly of small discoveries. These are generally smaller in terms of recoverable resources, meaning the potential production volumes may not justify the cost of developing a new standalone facility.
For many of these discoveries, the commercial route to production is a subsea tieback to an existing host facility with suitable capacity. By avoiding the need for a new standalone production facility, this approach can materially reduce the investment required to bring smaller resources into production.
Additional production can also help spread the host facility’s lifetime operating costs, further strengthening the economics of tieback developments.
Equinor's plans reflect the growing importance of this approach. The operator is targeting around 75 subsea developments on the NCS towards 2035 and says 80% of its planned exploration will take place near existing infrastructure. For the installation supply chain, the opportunity is clear - but delivering a greater number of tiebacks efficiently does not mean every installation campaign will look the same.
Combining standardisation with installation engineering

The economics of smaller discoveries are forcing the industry to look for faster, more repeatable ways of bringing resources into production. Equinor aims to reduce cost and execution time through simpler processes, greater standardisation and closer collaboration with its supply chain.
For offshore installation, proven equipment configurations and engineering methods can support this approach, with the spread adapted to suit each campaign’s product, vessel and handling requirements.
A tieback may involve flexible flowlines, risers, umbilicals, cables or other subsea products, each carrying its own handling and installation requirements due to individual design characteristics and how they may be impacted by different weather states and water depths.
Specialist pipelay and flexlay construction vessels are designed for these operations. Their day rates and availability can, however, affect the economics and scheduling of smaller scopes.
For these, a readily available offshore support vessel equipped with portable flexlay technology, such as MDL’s, can provide an alternative. Our engineering experts assess the product’s handling and installation requirements alongside the vessel’s capabilities to select the equipment and develop a deck layout suited to the planned installation methodology.
How engineering unlocks efficient tiebacks
Before mobilisation, the product, vessel, installation equipment and methodology need to be considered as parts of the same system. First, product characteristics determine handling requirements, while the planned installation sequence dictates how the overall spread needs to integrate. But available deck space and equipment positioning can affect product routing and operations, as fixed vessel geometry and interfaces may influence where equipment can be positioned.

MDL front-end engineering experience has demonstrated how considering these factors at early planning stage can identify efficiencies at every phase of the project. This may include better utilisation of the available deck space, integration with existing equipment on board and streamlined routing for a smoother mobilisation, faster execution and optimised handling of delicate flexibles.
MDL's 2018 Norwegian North Sea campaign for TechnipFMC illustrates the point. The challenge was to accommodate a four-reel arrangement on a tight vessel deck while working around the vessel crane and ancillary equipment. Previous work in the field was performed in two-reel setups, but the operator Equinor was seeking time and efficiency improvements on follow-up campaigns.
The combination of MDL’s compact flexlay technology alongside our in-house 3D rendering capability visualised how a four-reel setup could be achieved on the same OSV previously used, but with a different equipment selection and configuration.
As a result of this higher on-board carrying and installation capacity, the project achieved operator’s goal of halving the number of port calls required to complete the scope. Importantly, early engagement with MDL and application of our in-house engineering tools gave the contractor the confidence in progressing with the proposed layout and methodology.
A different handling challenge arose during Allseas’ flow assurance project. The work involved installing a Direct Electrical Heating (DEH) cable onto a flowline system to help prevent hydrate and wax formation.
The operation was carried out in two phases. First, a feeder cable was piggybacked onto the DEH cable, using MDL’s cable-lay spread on board a pipelay vessel, the Pioneering Spirit. The compact arrangement enabled the feeder cable to be installed alongside the heating cable from a busy back deck.
For Phase 2, the spread was adapted with the addition of a level winder and hinged overboarding chute, then mobilised on board the offshore support vessel Highland Eagle. It was used to recover and reroute the feeder cable towards the platform’s J-tube, while Pioneering Spirit remained in the field for other operations.
The two projects required different responses: the first was strongly influenced by deck space constraints, while the second needed the spread to be adapted for cable installation, recovery and rerouting across two vessels. Together, these examples clearly illustrate that while the wider development model may become more repeatable, offshore installation still needs to be planned around each campaign’s product, vessel and handling requirements.
Maximising existing assets - above and below water

Modularity delivers the most value when combined with engineering. It allows portable equipment to be configured for available vessels, with the complete installation spread developed around the product, back-deck space and offshore methodology - then adapted as campaign requirements change. For Norway, that capability becomes increasingly relevant as the industry looks to accelerate subsea development - including those smaller discoveries, through faster, lower-cost execution.
The challenge is balancing greater standardisation at development level with the flexibility required at installation level. Norway's next wave of tiebacks will not all present the same offshore challenge – the combination of different host platforms, products, vessels and installation methodologies will continue to create distinct requirements.
The opportunity for the subsea supply chain is therefore not simply to provide more equipment for a growing number of tiebacks, but to combine existing support vessel capability with portable equipment and engineering expertise to deliver efficient offshore installation solutions.
If you are planning a tieback project in Norway, get in touch with our local team to discuss how a portable solution could be tailored to your product, vessel and installation requirements.
- October 2026Supporting Oceaneering SURF campaign off Egypt
- October 2026Embracing Norway's tieback opportunity
- October 2026MDL WHLS: pushing the vessel envelope
- September 2026Building flexibility into subsea recovery
- September 2026MDL Integrated Project Services enable Brazil deepwater decom
