The MDL HLS-300 is a portable horizontal lay system for the deployment and recovery of subsea umbilicals, risers and flowlines (SURF).
The system allows for safe and efficient deployment of product from on-deck reel drive systems and carousels.
Lay spread type
Portable Horizontal Lay System
21.8m x 10.5m x 11.8m (LxBxH)
98Te excluding tensioner
Work platform deck area
Work platform deck capacity
Work platform opening
Clearance between overboarding chute and hang-off beam
Clearance between chain hook and hang-off beam
Product Handling Requirements
Maximum product tension
100Te (dynamic load)
50mm - 600mm OD
Entry chute radius
Overboarding chute radius
4.0m (options available)
Hang-off beam capacity
All items supplied with integrated lift points and swivel lift eyes.
System suitable for onshore lifts
in accordance with DNV
If davit arms are supplied these will be provided with manual 5Te chain hoists on trolleys.
Power Requirements (HLS only)
3 phase, 440V (+earth), 60Hz
36kW HPU required
Up to 100%
Operational: -10ºC to +50ºC
Survival: -20ºC to +65ºC
Modularity: A modular system that is road transportable for economical road/sea transport.
Easily mobilised: Assembled on the quayside and lifted on board in one lift for the HLS, and second lift for the tensioner.
User-friendly: Hydraulically operated moonpool doors and hang off beam. Padeyes to aid product handling, strategically placed around the firing line. Pad basket storage located beside the tensioner to provide access for safe and efficient tensioner pad change-out when offshore.
Accessible: All operational areas of the HLS are accessible by ladders and walkways, complete with handrails. Sufficient lighting throughout to facilitate 24-hour operations with an integrated power supply.
Versatile: Designed to integrate the full suite of MDL tensioners for the full range of product diameters. The high and low tension chutes pivot to allow for diameter changes. This provides a consistent product transition into and out of the tensioner with project-driven diameter changes.
Project-focused: The high tension chute is fitted with a water lubrication system. The hang off beams have two integrated 10 Te SWL swivel D links for tailing operations.
Safe: E-stops mounted at each end of the HLS base frame allowing for safe control of operations.
Optional Extras: As each project has different requirements, the following optional extras can be supplied with the HLS:
• 5.2m radius high tension chute
• 2 x 2Te SWL hydraulically operated davit arms, complete with 180 degree pivot to aid jewellery handling
• Various radius moonpool door tulip (departure flare)
• Hang-off plate (half shell clamps) to suit the products to be installed
• Integrated pull-through winch
• The high tension chute can be fitted with a low friction UHMPE coating
• Integrated HPU