TTS-2/12.5 Series Tensioner
The MDL TTS-2/12.5-01 Series Tensioner is a 5Te line pull, 2-track system for the installation or recovery of flexibles, cables, umbilicals and steel pipe products.
The tracks are fitted with ‘V’ shaped pads and operate by gripping the product between the opposing track carriages with failsafe hydraulic cylinders
Properties
Dimensions
6.2m x 1.8m x 2.5m (LxBxH)
Weight
7.0Te
Specification
Operation mode (side loading)
2 track mode
Track contact length
1.75m
Max squeeze
250 kN
Max operating pull
5Te at 0.2 CoF
Product speed
Variable 0 - 1,200m/hr
Product Capacity
Product range
0-350mm OD (may require additional track pad sets)
Maximum track opening
400mm
Ancillary Equipment
Control Cabin
Integrated into the MDL product loading tower
The tensioner can be supplied with a standalone control cabin, depending on project requirements.
Lifting Equipment
1 x lifting rigging set for the tensioner
Hose & Cable Package
Available upon request
Power Requirements
Supply 1 (main system)
3 phase, 400-440V, 50-60Hz, 80/69amp supply at full load
Assumed Conditions
Humidity
Up to 90%
Atmosphere
Marine/high salinity
Additional Information
User friendly:
- Tracks driven by an electric motor/brake/gearbox drive assembly to deploy or retrieve the product
- The two-track carriages are mounted in the main structural frame. This is connected to the mounting frame with low shear mounts and load cell pins for accurate product load information
- The top track opens hydraulically to load/unload product and closes to grip the product when operational
Project focused:
- Integrated EPU powers and controls the drive motors, while an integrated HPU powers the hydraulic squeeze circuit
- Optional facility for data logging and remote interrogation, subject to set-up and bandwidth on-board vessel
